MAINS FILTER

DIY FILTER FOR EMC & NOISE REDUCTION

M0NWK has a great blog and on there, he talks about making an effective EMC/NOISE REDUCTION MAINS FILTER. It consists of a bit of mains cable and a ferrite ring (Fair-Rite type 31) which is easily obtainable in the UK for around £15.

It takes just a few minutes to put it together and it is quite effective. Inserting it into the mains feed of my shack has brought slightly lower levels of noise. It helps to stop common-mode currents from getting into the mains and also stops noise from the mains, so it could help you with both TX & RX issues.

I inserted mine just in front of a Mains Distribution block which feeds every component in the shack.

All the details can be found on Adrian Leggett's blog. Click the link below...

> CLICK HERE <

SHACK SORT-OUT #101

YAESU FT-DX3000 ARRIVES

When the DX3000 arrived, I was ill. Too lethargic to plug it in and try it even, so it was a few days on the desk before I could muster the strength to make a space for it. And because I knew that this was my "keeper" radio, I had to sort out the mess that had become my current shack.

For a start, I can only have one coax cable running across the front of my house to the shack, so I decided to install an antenna-switch to the back-side of the bungalow where the G5RV Ladder Line drops down. Why?? Because I quite often erect temporary Dipoles and End Fed Half Waves in the back garden and operate from there, but on rainy days it'd be nice to operate from the shack. 

Being able to plug a rear-garden antenna into the waterproof switch box would mean that I could experiment with antenna in the back garden and simply flick the switch to send the signal to the shack.Perfect! 

Once that job was out of the way, I started to rip out the shack cabling and moved all the bits of junk that inevitably builds up. I fitted a new 8-Socket extension and fitted it to the wall for ease of access and then started to tag every cable I could find with some very handy Cable-ID tags I got from Amazon.

Then I had to prep some new interconnects for the MFJ 993B including the (poorly constructed MFJ-5124Y interface). Once I'd got all the cables laid out (power, coax in/out, speaker, ATU interface, USB, CAT, Ground and an IF-OUT to the RSP1A, I could position the DX3000, connect everything up and power on for the first time. 

With the radio and ATU powered up, it took a while to figure out how to actually operate the the MFJ 993B, but eventually I figured it out and was achieving 1:1 matches along the range of the G5RV except 10M which was about 1:1.4 

The floor noise of the FT-DX3000 is exceptional! It really is pleasing to listen to compared to any other base radio I've had in the shack (only the Elecraft matched it). That alone makes me happy that I chose it over the IC-7300. Tuning around 20M I stumbled upon my mate G0UXF who was chatting to operators across the UK - another great Inter-G day! All signals were superb with good quieting. 

I then switched antennas to the EFHW that was on a 7metre pole in the back garden as a sloper. The signals were good and I managed a very clear QSO with a French operator before starting to feel poorly again. At least the job was done. New radio and a better shack layout :-).

BIWOTA-2019

British Inland Waterways On The Air 2019

When I heard about this event, I thought I'd participate from the White Bear Marina in Adlington (close to my home) but a subsequent call to them revealed that they were closed for the Bank Holiday weekend, so I opted to go to Glass Dock Marina instead. It's around 3.5miles South of Lancaster.

I'm very familiar with the area and have explored it many times on-foot and on motorbike. It's a favourite spot of mine and for the purposes of playing radio, it has the added convenience of public toilets, a shop, a chuck-wagon, a cafe and a pub - this really helps when you're trying to sell the idea to your Station Manager.

In the photo above, you can see the car-park on the right and this is where I reversed my truck up to the fence line next to the footpath. It meant that I could strap my mast to a fence post for easy erection and I could also attach a second mast to my towball for a 2M antenna.

Once I'd got the masts up, out came the picnic table and deck-chairs for a nice, comfortable day in the sun. And boy, was it sunny!!! In fact, it would have been unbearable had it not been for the day-long cool breeze coming in from the estuary.

Before starting, we had a bit of breakfast and a cup of tea and then the Station Manager got stuck into her book while I started calling CQ on 2. It was pretty quiet but then it was still early on a Sunday morning. Someone I know from home shouted me but he was mobile and lost me before we could could establish a QSO, so I switched over to 40M on the SotaBeams BandHopper II and put some calls out there.

My first contact was G1YPG in Stone, North Midlands. Steve gave me a 59 and he was the same to me. The band was really quiet and I'd started to think something was wrong with my station until Steve came along, so it was good to confirm everything was okay.

I briefly switched back to 2M to make sure that was working fine and had a good QSO with G7CDA (Douggie) in Morecambe and he very kindly posted a notice on the NW FUSION GROUP for me in the hope I might get more calls. He told me that many of the members liked to play 2mSSB so I said I'd put some calls out on 144.300 but I would be restricted by the fact that I was vertically polarised :-(


Anyway, despite lots of calling, I got few responses on 2M SSB so I focused on 40M again and pretty soon I was reaching people all across the UK from Ireland, to the Outer Hebrides, Wales, Devon, Kent, Norfolk and Skegness. The was an amazing amount of Inter-G on the band and the signals were just fantastic! Needless to say, many operators were using high power (300W in Ireland) and I was just running 5W on my FT-818ND.

Later on in the afternoon the Europeans started to swamp the band and some were acting rather bullishly, stomping all over well-established frequencies. I managed to make quite a few contacts in France and Germany but then decided to call it a day.

It was a great day out and was thoroughly enjoyed by both myself and the Station Manager. Glasson Dock is a beautiful area on a sunny day and there's plenty of short, rewarding walks from the car park. Highly recommended.

FROM WINTER HILL

POINT ME IN THE RIGHT DIRECTION?

I was up at a very popular HAM spot at the weekend called Matchmoor Lane adjacent to Winter Hill and many a time I've seen amateurs and SWLers with very directional antennas pointing "roughly south". So when I did something similar, I got to thinking about the local visible landmarks and wondered where I'd actually be pointing if I aimed for these landmarks with my beam.

This is all very rough I know, but I was just curious, so when I went home I looked it up on Google Maps. I do understand that just a few degrees one way or the other has a dramatic effect on the bearing but nonethless, you can get a very broad idea where to aim if you have some landmarks to work from.

This spot is where most HAMS park up....

From this spot, it is very easy to make out the HILTON HOTEL in Manchester. It stands out like a sore thumb even on miserable days, so lets use that landmark to begin with. Stretching a line from this point at WinterHill to the Hilton and beyond will eventually get you looking at the South East coast of England and around the border of Belgium and France.

Now turning to the right and focusing on JODRELL BANK which is another very visible landmark most days, will get you firing toward Southampton.

Now turn further to your right and you will very easily see Bolton Flounderers football ground. Pointing there will have you heading in the general direction of Mid Wales...

Is this information of any use? I don't know, lol. But unless you have a reliable compass and know which bearing to head for, I guess it's better than nothing 😃😃😃

HOMEPAGE

MFJ-993B Auto ATU 1.8-30MHz 300W/150W

MATCH DAY SPECIAL

The Yaesu FT-DX3000 has a built-in ATU but it's only capable of matching something with an SWR of 3:1 or less. That is really only good for matching antennas that are virtually resonant but need a bit of tweaking at either end of the band they're designed for.

I use a half-size G5RV 90% of the time because of restrictions at my QTH which prevent me from using a multiband horizontal or vertical, so a tuner is essential!

My G5RV is in a shocking location but there is nothing  I can do about it. I live in a detached bungalow and one leg of the G5 runs just under the roof-gutter at the side of the house and is shielded by the fact that my neighbours house is just 12ft away in the same plane.

The other leg of the G5 is in open space but is no more than 15ft above ground. Pretty dire huh? Well that's how it is, so there's no point complaining about it.

Occasionally, I erect an inverted-vee dipole in the garden and operate outdoors if the weather permits. I may in time install a more permanent IV but for now, it's the good old G5RV.

Surprisingly. the G5 works pretty well on 80, 40, 20 and 12 so considering my main bands are 20 and 40, I'm quite happy. The trouble comes when I try to operate on 30, 17 and 10. No chance without a tuner!

I've since purchased an EFHW from Wire Antennas UK and have to say it EASILY outperforms the G5RV, but I still use it on ANT-2 input.

So, that gets us to the point of this post - the MFJ 993B ATU. I was going to buy an LDG ATU which is specifically designed for the DX3000 but then I read a few grumpy reviews which is really quite unusual for their products - they're normally very well regarded - not least of all by myself who's had nothing but good experiences with them.

And then it dawned on me that I've had quite a few "dedicated" ATUs and always had to sell them whenever I change radio. Bit silly huh? So I looked around for an Auto ATU which would work with any radio and that's when I came across the MFJ 993B.

The beauty of this ATU is that it is fully automatic and capable of matching almost anything! It includes analogue and digital readouts of Forward & Reflected power. It can accommodate 2 antennas and even a balanced-line.

So this ATU can be used with any radio, but more than that, an interface cable can be purchased to link the ATU directly to a specific radio and make operation even simpler by permitting the operator to press the radio's TUNE button and letting the radio and ATU sort everything out including reducing the power, generating a tone, tuning the antenna and then returning the radio to its previous power setting.

The MFJ-993B also has a gazillion memories to store already-tuned settings to speed up the tuning procedure the next time you use that same frequency. And as you talk on different frequencies, the MFJ 993B is learning all the time. Pretty smart!

So what's the downside? Well as usual, it's cost! The 993 is not the cheapest ATU out there, but at least it's a keeper and can be connected up to any radio/antenna that comes into your shack over the next few years. And the other downside is the Interface Cable kit - that too is expensive!

But as usual, I setup a search and like a vulture, I keep an eye out for a bargain - usually on eBay. It never takes long for one to come along :-)

HOMEPAGE

CUP OF TEA

YAESU FT-DX3000

NEW RADIO!

Ever since the Yaesu FT-1000MP left the shack, I've kinda missed having a big "traditional buttons, dials and knobs" radio to play with. Most of my radio time is spent outdoors running QRP but Winter is coming and I have decided that I want a full-size rig in the shack.

Looking around, there were lots of choices, not least of all the IC-7300 but one major consideration is the high Noise Floor at my QTH and according to my research, the Yaesu FT-DX3000 is better at quietening that noise down than the 7300.


The 7300 seems to be everyone's sweetheart right now and it was a very difficult radio to turn up my nose at, but ultimately, I needed that extra quieting and although the 7300 has a superb hi-res screen with panadapter and waterfall, I will be happy to use the DX3000's IF OUT to feed my RSP1A and have a BIG panadapter and waterfall on my PC screen.

I had originally considered the cheaper FT-DX1200 and found it very difficult to find a comparative list of features to help me make my mind up. Even some radio-stores didn't know all the differences, so as usual, it's down to the consumer to do the research. So here it is...

Over and above the DX1200, the FT-DX3000 has the following benefits/features...

• Better receiver architecture closely linked to the FT-DX5000/9000. The DX1200 is closer related to the FT-450 and 991 architecture.
   
• IF-OUT.  The 1200 has no IF-OUT socket. 
   
• USB connectivity. This makes connection to a PC very straightforward!
   
• SOUNDCARD built-in. Simplifies the digital modes of operation.
   
• FFT1 CARD built-in. Allows encoding/decoding of RTTY/PSK1 on-screen. Also provides decoding of CW and Auto-Tunes the CQ signal.
   
• REAL-TIME SCOPE. Shows real-time scope reading like the 9000.
   
• THREE ANTENNA SOCKETS.
   
• SEPARATE FREQUENCY DISPLAY.
   
•  SEPARATE FH-2 KEYPAD
   
• LINE IN/OUT
   
• 13.8v OUT
   
• EXTERNAL ALC OUT
   
• RX OUT
   

Although it has a built-in ATU, it's pretty useless in that it will only work with a 3:1 SWR - anything worse than that and you can forget it! Well that's not gonna cut the mustard with my G5RV, so I'll have to invest in a good external ATU.

Oh and just look at Amazon's price (UK Aug 2019). I always considered Amazon to be pretty competitive but this proves otherwise.....

Just arrived..........

UPDATE: 

Since writing this post over 2yrs ago, I upgraded to a higher-end radio and never came back here to complete a review of the radio - which I'm annoyed about!

Let me start by saying that the FT-DX3000 is one of the most enjoyable radios that I've ever owned. I actually miss this radio and have even thought of buying another one on the secondhand market. Why?? Well it just did everything effortlessly.

The flagship  Yaesu 101D which I bought just annoyed the hell out of me!! The DX3000 just sat in the background doing its job and I probably didn't fully appreciate (then) how good it actually was for the money. If I get another one I will review it fully.

73, Tom, M7MCQ

HOMEPAGE